PLP Golf & Turf - R&R Products

Search Parts


Item #	R&R Part No.	Description
Hollow Alloy Side-Eject Tines Manufactured from special high carbon alloy tubular steel with a precision machined slot in the side wall to allow for more efficient core removal in heavy soils. R&R’s unique method of machining maintains the maximum side wall height for strength to avoid bending. These tines are through hardened to RC45-48 to create a much tougher and more wear resistant tine.
	R201430	Tine - Hollow Hd 1/2 x 3/4 Mt
	R201431	Tine - Side Eject 5/8 x 3/4MT
Standard Hollow Tines Designed to remove a soil core, R&R Standard Hollow Tines are constructed from case hardened tubular steel and are the most economical tines available. Case hardening hardens the inner and outer surfaces of the tine wall to over RC55 for added wear.
	R201338	Tine - Hollow 5/8 x 3/4MT x 4-1/2L
Carbide-Tipped Alloy Hollow Tines The R&R Carbide-Tipped Alloy Hollow Tine construction is the same special high carbon alloy steel tubing and hardened to RC45-48 as the alloy hollow tines, with the addition of a carbide tip for even longer life. The advantage of using carbide tipped tines is the ability to maintain your maximum aerating depth consistently over the life of the tines. You can expect these tines to last 6-8 times longer than the R&R Standard Hollow Tines. Carbide tipped tines are not recommended in rocky soil conditions, as carbide, which is extremely wear resistant, can break when encountering hard impacts in rocks.
	R201339	Tine - Hollow Carbide Tip 5/8
Alloy Solid Tines These tines aerate without the work of cleaning up the mess of cores and debris left behind with conventional core aerating. R&R Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC45-48 in our own heat treat facility. They are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and no cores, play can be resumed immediately.
	R201432	Tine - Solid 5/16 x 4.375 x 3/4 Mt.
	R201433	Tine - Solid 3/8 x 4.375 x 3/4 Mt.
	R201434	Tine - Solid 1/2 x 4.375 x 3/4 Mt.
Alloy Shatter Tines With their "+" shape, R&R shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. R&R Shatter Tines are manufactured from special high-carbon alloy investment castings and heat treated to RC45-48 in our own facility to insure you of optimum quality.
	R201570	Tine - Shatter 1/2 x 3/4 Mt